Filter
Top Products
Using the Control Panel Menu 199
Menu Item Parameter
Media Setup
See “The Media Setup
Menu” on page 203.
Media Remaining
Remaining Setup On, Off
Length 1.0 to 999.5 m (3 to 3000 ft)
Remaining Alert 1 to 15 m (4 to 50 ft)
Print Remaining Length Print
Select Media RIP Settings, 1 to 30 (media setting bank number)
Customize Settings
Current Settings
RIP Settings
Platen Gap 1.5, 2.0, 2.5
Head Alignment Input thickness.
0.1 to 1.0 mm (4 to 40 mil)
Standard (Auto) Print
Standard (Manual) Print
Block pattern Manual(Uni-D), Manual(Bi-D), Manaul(Dual Head)
*1
Roll Type Printable Side Out, Printable Side In
Tension Measurement Periodically, Every Page, Off
Media Tension 0 to 40
Restore Settings Yes, No
1 to 30 (media setting bank)
Setting Name Up to 22 half-size characters
Platen Gap 1.5, 2.0, 2.5
Auto Media Adjust Print
Media Adjust
Feed Adjustment Auto, Manual
Head Alignment Standard (Auto), Standard (Manual), Block pattern
Heating & Drying
Heater Temperature Pre-heater/platen heater: 30 °C to 50 °C (86 °F to 122 °F)
After heater: 30 °C to 55 °C (86 °F to 131 °F)
Drying Time Per Pass 0 to 10 sec
After Heater Feed Mode 1, Mode 2, Off
Additional Dryer On, Off
Advanced Settings