Filter
Top Products
Basic Operations 114
The approximate maximum length of the media required to print the test pattern is given
below. The amount of media used varies with the printer model and the media system
used.
S70675, S50675
S30675
1. Load the media according to the actual usage conditions.
When usage conditions change, the adjustment results will also change.
❏ When using the auto take-up reel unit, load the media in the printer, and attach it to
the auto take-up reel unit. See “Loading and Exchanging Media” on page 38 and
“Using the Auto Take-up Reel Unit” on page 92.
❏ When not using the auto take-up reel unit, pull the media straight forward until the
edge has passed the label on the top side of the after heater. See “Loading and
Exchanging Media” on page 38.
2. Use the d or u button to select Auto Media Adjust, and press the Z button.
This mode automatically performs pattern printing and adjustment.
When Ready is displayed on the control panel, adjustment is completed.
Heating & Drying
You can set the temperature of the heaters or turn the fan for the additional print drying
system on or off (included with the S50675 and optional with other models). Heater status
can be viewed on the control panel display. See “Understanding the Display” on page 22.
1. Use the d/u buttons to select Heating & Drying and press the Z button.
2. Use the d/u buttons to select the desired option and press the Z button.
3. Choose a value.
Heater Temperature
Standard roll media system Approx. 987 mm
Heavy Roll Media System Approx. 1116 mm
Standard roll media system Approx. 1061 mm
Heavy Roll Media System Approx. 1190 mm