Filter
Top Products
Installing Your Software 1-1
Chapter 1
Installing Your Software
The EPSON Scanning Utilities come with installer software that
makes them easy to install with Windows 95 or Windows 3.1.
Getting Ready to Install Your Software
Before you install the EPSON Scanning Utilities, make sure you
have set up your scanner and connected it to your computer as
described in the User’s Guide that comes with your scanner. If
you are using a SCSI interface, make sure the interface settings—
such as the SCSI IDs and terminators—are set properly, and that
you installed the SCSI software if necessary.
You must install the EPSON Scanning Utilities as described in
the next section before you use your scanner. It is also best to
install the EPSON Scanning Utilities before you install your
application software. Check that you have the two 3.5-inch
diskettes that come with the scanner and contain the EPSON
Scanning Utilities (EPSON Scan! II, EPSON TWAIN, the
calibration utilities, and other related files). It is best to make
backup copies of the diskettes, work with the copies, and keep
the original diskettes in a safe place. (To make backup copies, see
your computer or operating system manual.)
After you install the EPSON Scanning Utilities, you can calibrate
your system as described in Chapter 2. Then install your
application software by following the instructions in the
application’s documentation.