Filter
Top Products
Epson SureColor T-Series User’s Guide
Copying and Scanning
77
Large Scan
This section describes the procedure to scan on the
control panel of the printer.
Buttons that are used in the following settings
1
Turn on the printer by pressing the P button.
If the printer is turned on, the scanner is also
turned on.
2
Load paper suitable for the large scan function
of the printer.
U“Epson Special Media Table” on page 187
3
Load document on the scanner.
U“How to Load Documents” on page 74
4
Make sure that the Large copy/Large scan screen
appears.
If another screen appears, use the l/r buttons
to select the tab.
5
At Large copy/Large scan screen, use the d/u
buttons to select Scan and press the Z button.
A screen appears to select the save/send
destination of the scanned file.
6
Use the d/u buttons to select save/send
destination and press the Z button.
If the HDD was selected, proceed to Step 8.
If Shared Folder or Send By Mail was selected,
proceed to Step 7.
7
Use the d/u buttons to select the save
destination folder or address, and then press the
Z button.
8
The details of the main scan settings appear.
When the Z button is pressed, scanning starts.
To change the settings, press the Menu button
to display the Scan Setting menu.
Using the Scan Setting menu
U“Menu Operations” on page 125
Settings
U“Large Copy / Large Scan menu” on page
153
9
When scanning has finished, the screen returns
to the one in Step 8. Press the r button to eject
the document. When the Z button is pressed
after loading the document, you can continue
saving or sending scanned files to the same
save/send destination.
After scanning has finished, always eject the
document. If the next document is loaded with
the previous document still inside, the next
document cannot be fed correctly.
You can change the eject direction of the
document.
Changing the eject direction
U“Changing the document eject direction” on
page 77
Changing the document eject
direction
After copying or scanning has finished, you can change
the eject direction when the document eject operation
is performed. The default setting is forward ejection.