Filter
Top Products
Epson SureColor T-Series User’s Guide
More Ways to Print
84
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including
vertical or horizontal banners and documents with
equal sides, save the desired paper size in the printer
driver. Once they have been saved in the printer driver,
custom sizes can be selected in the application Page
Setup and other print dialogs.
The following sizes can be used.
*1. The maximum printable width is 610 mm.
*2. The paper length can be longer if using applications that
support banner printing. However, the actual print size
depends on the application, the paper size loaded in the
printer, and the computer environment.
Making Settings in Windows
1
Display the printer driver's Printer Settings tab
and click the Custom Paper Size.
U“Basic Printing Methods (Windows)” on
page 57
2
Enter the desired size in the User Defined Paper
Size dialog and click Save.
O You can enter up to 24 single-byte
characters for the Paper Size Name.
O To view Paper Width and Paper Height
values for a standard size close to the
desired custom size, select the appropriate
option for Base Paper Size.
O If you specify the desired Fix Aspect Ratio
and select Landscape or Portrait for Base,
you need only enter either the Paper Width
or Paper Height.
Paper
Width
T7270/T7270D 89 to 1,118 mm
T5270/T5270D 89 to 914 mm
T3270 89 to 620 mm
*1
Length
*2
Windows: 127 to 15,000 mm
Mac OS X: 127 to 15,240 mm
c
Important:
O The smallest size supported by the printer is
254 mm wide
×
127 mm long. If a smaller size
is entered in the printer driver as a Custom
Paper Size, the document will print with
wider-than-expected margins, which must be
trimmed.
O For Mac OS X Custom Paper Sizes, although
you can specify a large paper size which
cannot be loaded on this printer, it will not be
printed properly.
O The available output size is limited
depending on the application.
c
Important:
Custom Paper Size is not available when
Front - Poster Board is selected for Source.