Filter
Top Products
5-127
Maintaining and Transporting the Printer | 127
Viewing Status Information
To view printer status information instead of printing it, follow these steps:
1. Press r
Menu.
2. Press d to select
PRINTER STATUS, then press r.
3. Do one of the following:
• To check the firmware version, press r again. When done, press l.
• To check the number of pages that can be printed with each ink
cartridge, press d to select
PRINTABLE PAGES, then press r. Press
d to view the number of pages remaining for each cartridge. When
done, press l.
• To check the amount of ink left, press d to select INK LEVEL, then
press r. The percentage of ink left in the first cartridge is displayed.
Continue pressing d to see the status of the remaining cartridges.
When done, press l.
• To check how much capacity the maintenance tanks have, press d
to select
MAINTENANCE TANK, then press r. The percentage
remaining for each tank is displayed. As the tank is filled, the
percentage drops. When done, press l.
• To check the amount of ink used (in milliliters) and paper used
(in centimeters), press d to select
USAGE COUNT, then press r.
Clear this setting with the
CLEAR USAGE COUNT option.
• To check job history, press d to select JOB HISTORY, then
press r. For the last 10 print jobs saved in the printer, you see the
ink used (in milliliters) and paper used (in square centimeters). The
most recent job is saved as No. 0. When done, press the l button.
• To check the total number of prints, press d to select TOTAL
PRINTS
, then press r. When done, press l.
• To check the EDM status of the printer, press d to select EDM
STATUS
, then press r. (EDM is a future enhancement.) When
done, press l.
4. Press the
Pause button to exit the menu.
Note: You can change
the units of
measurement from
centimeters to inches
and feet using
maintenance mode on
the printer’s control
panel. See page 137 for
instructions