Filter
Top Products
2-60
60 | Handling Paper and Other Media
Cutting Paper Manually
When you’re not using the auto cut setting, you may need to cut the paper
manually by pressing the button after your print job is finished. You can use
the l button to cut most types of paper. However, if you’re printing on fine
art paper, canvas, or other heavy media, you should use a matte knife or
scissors rather than the built-in cutter.
See page 49 for a list of media that should not be used with the built-in
cutter.
Follow these steps to cut manually with the built-in cutter:
1. Before you print, press l until you see the icon on the LCD display.
2. Run your print job.
3. If necessary, adjust the cutting position by pressing the u or d Paper
Feed buttons.
4. Press l until you see the
icon on the LCD display.
5. Press and hold the l button for 3 seconds. The paper is cut.
If you can’t use the built-in cutter, follow these steps to cut the paper with a
matte knife:
1. Make sure you have selected the correct (non-cuttable) paper type on the
printer’s control panel.
2. Before you print, press l until you see the icon on the LCD display.
3. Run your print job.
4. Press and hold l for 3 seconds to feed the paper to the manual cutting
position.