Filter
Top Products
5-142
142 | Maintaining and Transporting the Printer
When one of the tanks is almost full, the message NOT ENOUGH
CAPACITY, REPLACE THE XXX MAINTENANCE TANK
appears on the
LCD display, indicating which tank is almost full. When the tank is
completely full, the printer stops working and
MAINT TANK FULL appears
on the LCD, along with an indication of which tank is full.
You can check how much space remains in the maintenance tanks by
viewing the gauges on the control panel, shown below. You can also check
the tanks using Epson Status Monitor on your computer, using the printer’s
menu (see page 127), or by printing a nozzle check sheet (see page 130).
The icons show the approximate space remaining in the tank as follows:
The printer will not print if one of the maintenance tanks is full. Use this
replacement tank: C12C890191.
Follow these steps to replace the tank:
1. Check the LCD display to determine which tank needs to be replaced.
2. Unpack the new maintenance tank.
Empty Nearly full
Half full Full
3 maintenance
tank gauges