Filter
Top Products
5-139
Maintaining and Transporting the Printer | 139
5. Open the front cover.
6. Locate the cutter assembly with a blue plastic cover on the left side of the
print head.
7. Hold down the side pin as shown and turn the latch to the right.
8. Release the side pin carefully. The cutter pops out.
Caution: To avoid
damaging the printer,
make sure you don’t push
the side pin in too far. Do
not touch the black parts
inside the printer or the
cables around the print
head.
WARNING: The blade is
sharp. Be careful when
removing it.