5-129
Maintaining and Transporting the Printer | 129
You see a menu like the following:
3. Select the
Nozzle Check icon.
4. Follow the instructions on the screen.
5. After the pattern is printed, use at least a 30
× eye loupe to examine it.
• If the pattern looks good as shown below, the print head is clean.
• If any dots or segments are missing or deflected as shown below, run
a cleaning cycle from your computer or by pressing and holding the
r button for at least 3 seconds. Then print another nozzle check
pattern to make sure the nozzles are clean.
• If the nozzles are still clogged after three cleaning cycles, run a power
cleaning cycle as described page 131.
Windows
Macintosh
Caution: Don’t run a
cleaning cycle while
thick media is loaded in
the printer.