Filter
Top Products
36
■
Run the Print Head Alignment utility using EPSON ink jet paper. See page 24
for instructions.
■
Turn off
High Speed
printing in the Advanced dialog box.
Your printout is blurry or smeared.
■
Make sure your paper isn’t damp,
curled, or loaded face down (the
printable side should be loaded face
up). If it’s damp or curled, load new
paper.
■
Use a support sheet with special
paper or try loading your paper
one sheet at a time.
■
Make sure your paper meets the specifications listed in your electronic
Reference Guide.
■
Run the Print Head Alignment utility using EPSON ink jet paper. See page 24
for instructions.
Your printout is faint or has gaps in
the image.
■
Make sure the print head nozzles are
not clogged. To clean the print head,
see page 20.
■
If you’re low on ink, you’ll see a low
ink error window. Click
How To
and
follow the on-screen instructions to
install a new cartridge. If you don’t see
an error window, a cartridge may be more than six months old; to replace it,
see page 28.
■
Make sure the
Media Type
setting matches the paper you loaded. See page 19
for guidelines.
■
Make sure your paper isn’t damaged, old, dirty, or loaded face down. If it is,
reload a new stack of paper with the printable side up; it is usually whiter or
shinier than the other side.
Pbasics.book Page 36 Wednesday, August 9, 2000 10:26 AM