Filter
Top Products
Basic Operations 81
Printable Area
This section describes the printable areas for the printer.
If the margin set in an application is larger than the following setting values, sections
beyond the specified margins are not printed. For example, if 1.5 cm (15 mm) is selected
for the left and right margins in the printer menus and the document fills the page, the
1.5 cm (15 mm) at the left and right sides of the page will not be printed.
Roll Paper Printable Area
The gray area in the illustration below shows the printable area.
When printing borderless on the left and right, the left and right margins are 0 mm. When
printing borderless on all edges, all margins are 0 mm.
The arrow in the illustration indicates the direction of the ejected paper.
Margins for roll paper depend on the option selected for Roll Paper Margin in the menus,
as shown in the following table. For Roll Paper Margin Settings, see “Setup menu” on
page 175.
The default setting is Normal.
5 ~ 0.6 inches (127 ~ 15 mm)
4
4
0.1 ~ 0.8 inches (3 ~ 45 mm)
0.1 ~ 0.6 inches (3 ~ 15 mm)
0.1 ~ 0.6 inches (3 ~ 15 mm)0.1 ~ 0.6 inches (3 ~ 15 mm)
10 ~ 44 inches (254 ~ 1118 mm)
*1
10 ~ 36 inches (254 ~ 914 mm)
*2
10 ~ 24 inches (254 ~ 620 mm)
*3
A
C
D
B
*1 SureColor T7000
*2 SureColor T5000
*3 SureColor T3000
*4 If Banner is selected for Roll Paper Option in the
printer driver Advanced tab, the top and bottom margins
are 0 mm.