Filter
Top Products
Epson SureColor T-Series User’s Guide
Using the Control Panel Menu
140
Auto Loading
*1
On
*
Normally, leave the setting at On.
If you experience problems with automatic loading when you
use commercially available paper because of lack of tension,
slipperiness, extremely large curls, or other problems, set to Off.
Remove all paper before configuring this setting. If paper is
loaded, the setting cannot be changed.
While the setting is Off, the Roll 2 unit cannot be used.
Off
Roll Switch Setting
*1
Auto
*
Select the action to take when the roll currently in use is under
the following conditions: automatically switch between Roll 1
and Roll 2 and print (Auto) / print fixed to Roll 1 (Roll 1)/print
fixed to Roll 2 (Roll 2).
O The roll is finished, and there is data still to be printed.
O The printer predicts that there is not enough roll paper
remaining, and printing cannot be completed.
O The print margin will be large for the width of the print job.
When the setting is Auto, the roll is switched according to the
Roll Switch Condition setting.
Roll 1
Roll 2
Item Description