Filter
Top Products
Epson SureColor T-Series User’s Guide
Appendix
197
Notes When Moving or
Transporting the Printer
This section describes precaution when moving and
transporting the product.
Notes When Moving the Printer
This section assumes that the product is being moved
to another location on the same floor without
traversing stairs, ramps, or lifts. See the following
section for information on moving the printer between
floors or to another building.
U“Notes on Transporting” on page 198
Getting Ready
1
Confirm that the printer is off.
2
Disconnect the power cords and all other cables.
3
Close the paper basket.
When the optional auto take-up reel unit is
installed, remove any paper from it.
4
When the optional Multifunction stand is
attached, pull up and fix the fall prevention
fixture of the stand.
5
Unlock the stand.
Release the locks of the casters on the left and
right legs.
!
Caution:
Do not tilt the product more than 10 degrees
forward or back while moving it. Failure to
observe this precaution could result in the printer
falling over, causing accidents.
c
Important:
Do not remove the ink cartridges. Failure to
observe this precaution could cause the print head
nozzles to dry out.
c
Important:
If the printer is moved with the fall
prevention fixture lowered, the floor may be
scratched.