Filter
Top Products
5-50 Commands
Forth byte (paper sensor information)
[Default]
n
= 0 when DIP SW 2-1 (serial interface) or DIP SW 1-3 (parallel
interface) is off,
n
= 2 when DIP SW 2-1 (serial interface) or DIP SW 1-
3 (parallel interface) is on.
[Reference] DLE EOT, ESC u, ESC v, GS r
GS b
n
[Name] Turns smoothing mode on/off
[Format] ASCII GS b
n
Hex 1D 62
n
Decimal 29 98
n
[Range] 0
≤
n
≤
255
[Description] Turns smoothing mode on or off.
When LSB of
n
is 0, smoothing mode is turned off.
When LSB of
n
is 1, smoothing mode is turned on.
[Notes] • Smoothing mode is available for built-in, user-defined characters.
• Even if smoothing mode is turned on, smoothing is not performed
when either of character width or character height id the normal
size.
[Default]
n
= 0
[Reference] ESC !, GS !
GS f
n
[Name] Select font for Human Readable Interpretation (HRI) characters
[Format] ASCII GS f
n
Hex 1D 66
n
Decimal 29 102
n
[Range] 0
≤
n
≤
1, 48
≤
n
≤
49
Bit Off/On Hex Decimal Status for ASB
0 - - - Undefined.
1 - - - Undefined.
2 - - - Undefined.
3 - - - Undefined.
4 Off 00 0 Not used. Fixed to Off.
5 - - - Undefined.
6 - - - Undefined.
7 Off 00 0 Not used. Fixed to Off.