Filter
Top Products
Setting Up the Printer 1–5
Connecting the Printer to the Computer
You need an appropriate serial interface or parallel interface cable
to connect your computer to the printer (null modem serial or IEEE
1284 parallel).
The Model with Serial Interface
1. Make sure the printer and computer are turned off. Then plug
the cable into the connector on the printer, as shown.
Note:
Your printer comes with inch-type hexagonal lock screws installed.
If you plan to use an interface cable that requires millimeter-type
lock screws, replace the inch-type screws with the enclosed
millimeter-type screws by using a hex screwdriver (5 mm). To
distinguish between the two types of screws, see the illustration
below.
2. Connect the other end of the cable to the connector on your
computer.
Notch (one or more lines)
Millimeter-type
Inch-type