Filter
Top Products
Setting Up the Printer 1–23
CAUTION:
Do not change the settings of switches 2-2, 2-3, 2-5, and 2-6.
Changing these settings may cause inferior print quality.
Model with Parallel Interface DIP-Switch Functions
1-6 Parity selection Even Odd
1-7 Baud rate 4800 BPS 9600 BPS
1-8 Busy condition Sets the printer to
go BUSY when the
receive buffer is full
Sets the printer to go
BUSY when it is off
line or the receive
buffer is full
DIP Switch Set 2
Switch Function ON OFF
2-1 Print column selection
7
×
9 font/9
×
9 font
42/35 40/33
2-2 Internal use. Setting must not be changed. (Fixed to ON)
2-3 Internal use. Setting must not be changed. (Fixed to OFF)
2-4 Undefined
2-5 Internal use. Setting must not be changed. (Fixed to ON)
2-6 Internal use. Setting must not be changed. (Fixed to OFF)
2-7 I/F pin 6 reset signal Enabled Disabled
2-8 I/F pin 25 reset signal Enabled Disabled
DIP Switch Set 1
Switch Function ON OFF
1-1 Auto-line feed Enabled Disabled
1-2 Receive buffer
capacity
40 bytes Approximately 1K
byte
1-3 Undefined
DIP Switch Set 1
Switch Function ON OFF