Filter
Top Products
1–26 Setting Up the Printer
Affixing the Fastening Tape (Option)
Two sets of tape are included as an option to fasten your printer to
a countertop or other surface. Follow the steps below:
1. Clean the countertop or other surface where the printer will be
installed.
2. Peel the green backing paper off of one side of each of the two
sets of tape and affix them to the bottom of the printer, as
shown below.
3. Peel the green backing paper off of the other side of the tape.
4. Press the printer onto the countertop; it will be held firmly in
place by the fastening tape.