Filter
Top Products
Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
TROUBLESHOOTING Error Indications and Fault Occurrence Causes 29
Confidential
3.2 Error Indications and Fault Occurrence Causes
This chapter describes how the printer indicates an error status with LEDs, and why the error is caused, when a problem happened during each sequence/operation (power-on
sequence, paper feeding, ink drawing, and so on).
Note : --: No change
Flashing: Repeats ON and OFF every 1.25 seconds.
High-speed flashing: Repeats ON and OFF every 0.5 second.
Table 3-1. Error Indications and Fault Occurrence Causes
Error Name
LED Indications
Error Cause Reference
Power Paper Ink
Fatal error (scanner)
High-speed
flashing
High-speed
flashing
High-speed
flashing
• RAM trouble occurs.
• System trouble occurs.
Table 3-2. (p30)
Fatal error
(printer mechanism)
Flashing Flashing Flashing
Mechanical trouble occurs.(CR error, PF error etc.)
Maintenance error (waste ink overflow) Flashing ON ON The waste ink counter exceeds to capacity. Table 3-3. (p36)
Paper jam error -- Flashing OFF Paper stays in the paper path after paper ejection. Table 3-4. (p37)
Paper out error -- ON OFF Failure to load paper to print. Table 3-5. (p40)
Double feed error -- Flashing OFF Double feed during double sided printing. Table 3-6. (p42)
Ink out error / No ink cartridge error/
Ink cartridge detection error
-- OFF ON
• The cartridge has run out of ink.
• The printer could not detect the cartridge.
• The printer detected non-Epson cartridge.
• Writing to/reading from the CSIC could not be made.
Table 3-7. (p43)