Filter
Top Products
Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Printer Mechanism 72
Confidential
4.5.3 Hopper
Parts/Components need to be removed in advance:
Scanner Stand/Cover Wire (p 60), Scanner Unit (p 62), Middle Housing (p 63)
Panel Unit (p 64)
Removal procedure
1. Release both the dowels that secure the Hopper, and remove the Hopper and
the Compression Spring from the Lower Housing.
Figure 4-37. Removing the Hopper
2. Release the hook that secures the Edge Guide, and remove the Hopper from
the Edge Guide.
Figure 4-38. Removing the Edge Guide
Hopper
Lower Housing
Compression Spring
Hook
When installing the Hopper, make sure to install the Compression
Spring under the rib as shown below.
Figure 4-39. Assembling the Hopper
A D J U S T M E N T
R E Q U IR E D
Whenever the Hopper is removed/replaced, the required
adjustments must be carried out.
• Chapter 5 “ ADJUSTMENT” (p.100)
Hopper
Edge Guide
Hook
Rib
Compression Spring