Epson TX105 All in One Printer User Manual


 
Epson STYLUS NX100/NX105/SX100/SX105/TX100/TX101/TX102/TX103/TX105/TX106/TX109/ME 300 Revision A
DISASSEMBLY/ASSEMBLY Disassembling the Scanner Unit 98
Confidential
6. Disengage the shafts on both ends of the CIS Unit from the bearing holes of
the Scanner CR Holder, and remove the unit.
Figure 4-111. Removing the CIS Unit
CIS Unit
Shaft and Shaft hole
Scanner CR Holder
Install the CIS springs (x2) to the dowels of the Scanner CR
Holder. (See
Fig.4-112.)
Figure 4-112. Installing the CiS Spring
When installing the spacers, be sure to place them with the
cutout facing inward. (See
Fig.4-113.)
Figure 4-113. Replacing the Spacers
Scanner CR Holder
CIS Spring
Dowel
Spacer