Filter
Top Products
4. Select one of these options:
• Reset Fax Send/Receive Settings: Resets all settings on the Send Settings, Receive Settings,
and Communication screens.
• Reset Fax Data Settings: Erases the speed dial list, group dial list, header, and fax log.
• Wi-Fi/Network Settings: Resets all network settings.
• Reset All except Network & Fax Settings: Resets all control panel settings, except for network
and fax settings.
• All Settings: Resets all control panel settings.
You see a confirmation screen.
5. Select Yes to reset the selected settings, then press OK. (Select No, then press OK if you want to
cancel the operation.)
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.
Noise After Ink Installation
Software Installation Problems
Parent topic: Solving Problems
Noise After Ink Installation
If you hear noises from your product after installing ink, try these solutions:
• The first time you install ink cartridges, the product must prime its print head. Wait until priming
finishes before you turn off the product, or it may prime improperly and use excess ink the next time
you turn it on. Your product is finished priming the print head when the power light stops flashing.
• If the product's print head stops moving or making noise, and the charging process has not finished
after 6 minutes, turn off your product. Turn it back on and check to see if charging is still in progress. If
it is still in progress, contact Epson for help.
Parent topic: Solving Setup Problems
264