Filter
Top Products
Operation, cont’d
CrossPoint 300 Matrix Switchers • Operation3-12
1 2 3 4 5
OUTPUTS
6
ENTER PRESET
Press and release the Output 1 button.
The LED blinks to indicate that the selected
RGBHV input will be tied to this output.
The Enter LED blinks to indicat
e
the need to confirm the change
.
Figure 3-13 — Select the output
5. Press and release the Enter button (figure 3-14).
E
NTER
The Enter LED and all input LEDs an
d
output LEDs return to the unlit state.
Press the Enter button to confirm
the configuration change.
Figure 3-14 — Press the Enter button
The current configuration (figure 3-15) is now:
• Input 5 video tied to output 1, output 3, output 4, and output 8
• Input 5 audio tied to output 3, output 4, and output 8
Input 5 video tied
to outputs 1, 3, 4, and 8.
Input 5 audio tied
to outputs 3, 4, and 8.
Input
Output
1
3
4
8
5
Vide
o
Aud
io
Figure 3-15 — Example 2, final configuration
Example 3: Removing a tie from a set of video and audio ties
The following steps show an example in which an existing audio tie is removed
from the current configuration. The steps show the front panel indications that
result from your action.