Filter
Top Products
3-13CrossPoint 300 Matrix Switchers • Operation
This example assumes that you have performed example 1 and example 2.
1. Press and release the Esc button (figure 3-16).
ENTER PRESET VIEW ESC
CONTROL
P
ress the Esc button to clear all selections.
The LED
blinks once
.
Figure 3-16 — Clear all selections
2. To select audio only for the tie, if necessary, press and release the RGBHV
button and/or Audio button (figure 3-17).
RGBHV AUDIO
I/O
P
ress the RGBHV button to toggle on and off.
The LED is
unlit
when deselected.
Press the Audio button to toggle on and of
f.
The LED lights when selected.
Figure 3-17 — Select audio only
3. Press and release the input 5 button (figure 3-18).
2 3 4 5 6
INPUTS
7
1 2 3 4 5
OUTPUTS
6 7 8
Press and release the Input 5 button.
The LED lights.
The Output 3, Output 4, and Output 8 LEDs light to indicate
the audio ties created in example 1.
The output 1 LED does not light to indicate the tie created
in example 2 because that tie is RGBHV only.
Figure 3-18 — Select an input
4. Press and release the output 4 button (figure 3-19).