Filter
Top Products
3-17CrossPoint 300 Matrix Switchers • Operation
5. Press and release the RGBHV button to deselect RGBHV (figure 3-25).
RGBHV AUDIO
I/O
2 3 4 5
OUTPUTS
6
7 8
The output buttons for outputs that are not tied to Input 5 are unlit.
The output buttons for outputs that are tied to Input 5 light to
indicate audio ties (audio breakaway).
The Audio LED
remains lit to indicate
that only audio is
selected.
P
ress the RGBHV
b
utton to delesect it.
T
he LED is unlit
w
hen deselected.
Figure 3-25 — Deselect RGBHV to view audio ties only
6. Press and release the RGBHV button and the Audio button to toggle the
RGBHV LED lit and the Audio LED unlit (figure 3-26).
VIDEO AUDIO
I/O
2 31 4 5
OUTPUTS
6
7 8
The output buttons for outputs that are not tied to input 5 are unlit.
The output buttons for outputs that are tied to input 5 light to indicate video tie
s
(audio breakaway).
Press the Audio button
to deselect it.
The LED is unlit when
deselected.
P
ress the RGBHV
b
utton to select it.
T
he LED lights
w
hen selected.
Figure 3-26 — Deselect audio and select RGBHV to view RGBHV only
If video ties are established for input 5, the output LEDs for all video outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs
return to the unlit state.
7. Press and release the View button to exit View-only mode (figure 3-27).
RE
SET
VIEW
CONTROL
Press the View button
to exit View-only mode.
The View LED returns to the unlit state
.
All input LEDs and output LEDs
return to the unlit state.
Figure 3-27 — Press the View button to exit View-only mode