Filter
Top Products
18 XTP CrossPoint 1600 and 3200 • Front Panel Operations 19XTP CrossPoint 1600 and 3200 • Front Panel Operations
Selecting Lock Mode 2 or Toggling Between
Mode 2 and Mode 0
NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure
selects mode 2. The Preset, View, and Esc buttons ash twice.
• If the switcher is in Lock mode 2, this procedure selects mode 0
(unlocks the switcher). The View and Esc buttons ash twice.
Toggle the lock on or off by pressing and holding the Preset, View,
and Esc buttons simultaneously until the buttons ash (approximately
2 seconds).
Press and
hold for
2 seconds
.
C O N T R O L
ESCVIEW
PRESET
ENTER
C O N T R O L
ESCVIEW
PRESET
ENTER
Lock mode 2
Lock mode 0
Press and hold for
2 seconds.
C O N T R O L
ESCVIEW
PRESET
ENTER
C O N T R O L
ESCVIEW
PRESET
ENTER
Selecting Lock Mode 2 or Toggling Between
Mode 2 and Mode 1
NOTES:
• If the switcher is in Lock mode 0 or mode 1, this procedure
selects mode 2. The Preset, View, and Esc buttons ash twice.
• If the switcher is in Lock mode 2, this procedure selects mode 1.
The View and Esc buttons ash twice.
Toggle the lock on and off by pressing and holding the Video button and
the Audio button simultaneously for approximately 2 seconds.
Press and
hold for
2 seconds.
C O N T R O L
ESCVIEW
PRESET
ENTER
C O N T R O L
ESCVIEW
PRESET
ENTER
Lock mode 2
Loc
k mode 1
Press and hold for
2 seconds.
C O N T R O L
ESCVIEW
PRESET
ENTER
C O N T R O L
ESCVIEW
PRESET
ENTER
Saving or Recalling a Preset
A "preset" is a conguration that has been stored.
1. Save a preset — Press and hold the Preset button until it ashes.
PRESET
PRESET
The Preset button blinks.
Press and hold.
2 seconds
Sa
ve a
preset
Recall a preset — Press and release the Preset button.
PRESET
PRESET
1 2 3 4 5 6 16
15
Recall a
preset
The Preset button lights.Press and release.
All input and output buttons with assigned presets light red.
When a preset is saved, the configuration data at
assigned preset locations is overwritten
.
INPUTS
2. Press and release the desired input or output button.
1
ENTER
The button blinks red to indicate that
this preset is selected to save or recall.
The Enter button blinks
red
to indicate the need to
activate the save or recall.
3. Press and release the Enter button.
Setting the Front Panel Locks (Executive Modes)
The matrix switcher has three levels of front panel security lock that limit
the operation of the switcher from the front panel. The three levels are:
• Lock mode 0 — The front panel is completely unlocked.
• Lock mode 1 — All functions are locked from the front panel (except
for setting Lock mode 2). Some functions can be viewed.
• Lock mode 2 — Basic functions are unlocked. Advanced functions
are locked and can be viewed only.
Basic functions consist of:
• Making ties
• Saving and recalling presets
• Setting input audio gain and attenuation
• Changing Lock modes
Advanced functions consist of:
• Setting audio output mutes
• Setting audio output volume
• Setting audio/RS-232 wire pair and front panel conguration
The switcher is shipped from the factory in Lock mode 2.