Filter
Top Products
XTP CrossPoint 1600 and 3200 • Introduction 1vi XTP CrossPoint 1600 and 3200 • Contents
Introduction
This section gives an overview of the congurable Extron
XTP CrossPoint 1600 and XTP CrossPoint 3200 Series and describes
their features. Topics that are covered include:
• About this Guide
• About the XTP CrossPoint Matrix Switchers
About this Guide
NOTE: For more information on any subject in this guide, see the
XTP CrossPoint 1600 and 3200 Series User Guide, available on the
Extron DVD or at www.extron.com.
This setup guide helps you to easily and quickly set up and congure
your XTP CrossPoint 1600 and 3200 switcher. Step by step instructions
show you how to:
• Install the input and output boards
• Connect the hardware
• Perform basic operations
• Use both the front panel controls and selected
Simple Instruction Set (SIS) commands
• Connect to the built-in HTML pages, which you can use to operate
the switcher
• Reconfigure the switcher by adding or removing boards
About the XTP CrossPoint Matrix Switchers
The XTP CrossPoint matrix switchers (see figure 1, on the next page)
distribute and transcode signals in a variety of video and audio formats,
identied by the input and output boards installed, dened in table 1,
on the next page. The matrix switcher routes an input signal of a format
supported by an installed input board to any combination of outputs with
formats supported by installed output boards. The matrix switcher can
route multiple input-to-output congurations simultaneously.