Extron electronic IN1404XT Switch User Manual


 
3-23IN1404XT Video Scaler and Switcher • Operation
epytyalpsiD
/topsteewsdetsegguS
noituloserevitan
detsegguS
etarhserfer
stnemmoC
syalpsiDTRC
rotinomatad"51867x4201,006x008zH57/zH27
rotinomatad"71867x4201zH57/zH27
rotinomatad"12-"914201x08
21,867x4201zH58-zH27
rotinomnoitatneserp"24-"72867x4201,006x008zH57/zh27
htiwyalpsidorterrorotcejorpataD
sT
RC"7
867x4201,006x008zH58-zH27
htiwsyalpsidorterrorotcejorpataD
sTRC"9
4201x0821,867x4201zH58-zH27
syalpsidamsalpdna,slenaptalf,srotcejorP
srotcejorpPLD
867x4201,006x008
4201x0821,027x0821
zH06
s'yalpsideh
tkcehC
roF.noituloserevitan
ehttes,006x848
.006x008otrelacs
srotcejorpALI-D4201x4631zH06
srotcejorpDCL
867x42
01,006x008
867x5631,4201x0821
zH06
s'yalpsidehtkcehC
.noituloserevitan
ebyamstinudloyreV
084x046
yalpsidlena
ptalf"51/"41DCL867x4201zH06
yalpsidlenaptalf"81DCL4201x0821zH06
yalpsidlenaptalf"82DCL867x0821zH06
)3:4(yalpsi
d"04amsalP084x046zH06
)9:61(yalpsid"24amsalP
867x4201,084x258
867x0821
zH06
"24ynoS/ustijuFroF
x4201htiwsamsa
lp
otrelacsehttes,4201
.867x4201tuptuo
,thgilxoB()9:61("06/"05amsalP
,prahS,ocnuR,reenoiP,GL,oziE
)cinoswe
iV
867x0821
,zH06,zH65
zH56
reenoiProF
esu,DH505-PDP
.zH65
,CVJ,ustizuF()9:61("06/"05amsalP
,cinosanaP,CEN,zt
naraM,ecuL
)abihsoT,gnusmaS,ocnuR,ACR
867x5631zH06
cnystes,"05CENroF
.++VHBGRottamrof
Fixed pixel displays — selecting the optimum resolution and refresh rate
Display devices that are based on LCD, DLP, D-ILA, and plasma technology have a
specific number of pixels, a native resolution. These displays typically can show
higher or lower resolution signals, but can only do so by scaling the image up or
down to the native resolution. To avoid additional image scaling by the display
(and more processing is inherently bad for image quality), it is important to know
your display’s native resolution.
Check the display’s operation manual to determine its native resolution. Set the
scaler to match this native resolution. The scaler’s refresh rate should be set to 60
Hz for most LCD, plasma, D-ILA, and DLP projectors.
Higher refresh rates are not recommended for these display technologies. They
usually do not improve the image and may cause compatibility problems.