Extron electronic MAV 48 Switch User Manual


 
3-9MAV 44 / 48 / 84 / 88 Matrix Switchers • Operation
The current configuration (figure 3-8) is now:
Input 5 video and audio tied to output 3, output 4, and output 8
Input 5 (video/audio) tied
to outputs 3, 4, and 8.
Input
Output
3
4
8
5
Vide
o
Aud
io
Figure 3-8 — Example 1, final configuration
Example 2: Add a video tie to a set of video and audio ties
The following steps show an example in which a new video tie is added to the
current configuration. The example shows the front panel indications that result
from your actions.
This example assumes that you have performed example 1.
1. Audio/video switchers only — Select video only for the tie (figure 3-9).
I/O
AUD
VID
Press the button to cycl
e
through the selections
.
The video LED lights when video is selected.
T
he audio LED is off when audio is deselected.
Figure 3-9 — Select video only
2. Press and release the Input 5 button (figure 3-10).
2
6
5
4
INPUTS
OUTPUTS
1
8
6
5
4
3
7
Press and release the Input 5 button.
The Input 5 LED lights to
indicate that input 5 is selected.
The Output 3, Output 4, and Output 8 LEDs light to indicate the ties created in
example 1.
Figure 3-10 — Select an input