Extron electronic MAV 48 Switch User Manual


 
4-17MAV 44 / 48 / 84 / 88 Matrix Switchers Remote Operation
Figure 4-13 Open window, version 1.xx firmware files
9. Version 2.xx firmware upload — A status bar, which shows the progress of
the upload, appears in the Firmware Loader window (figure 4-14). The
firmware upload to the switcher may take several minutes.
Figure 4-14 — Firmware Loader status indicator bar, switcher reset, and
firmware update
Once the status bar has progressed fully from left to right across the indicator
window, the firmware loader utility automatically resets the switcher
(figure 4-14).
If the firmware loader utility exits before the status bar has progressed
completely across the indicator window, try using a control cable with only
pins 2, 3, and 5 connected. If necessary, modify the cable by removing pins or
cutting wires.
If the firmware loader utility exits before the status bar has progressed
completely across the indicator window, the firmware may be corrupted and
may no longer respond to the Matrix Switchers Control Program. In this
condition, the firmware upload can be accomplished only by using the SIS
commands. See “Loading firmware using an SIS command” on page 4-10.
If your switcher has version 1.xx firmware files, pr
oceed to step xx.