Extron electronic MAV 48 Switch User Manual


 
Remote Operation, cont’d
MAV 44 / 48 / 84 / 88 Matrix Switchers Remote Operation4-16
4. Start the Matrix Switchers Control Program and connect to the MAV switcher.
See “Using the software”, steps 1 through 3, starting on page 4-13.
5. Click on Tools > Update firmware.
If your switcher has version 2.xx firmware files, the Extron Firmware Loader
appears (figure 4-12). Proceed to step 6a.
If your switcher has version 1.xx firmware files, an open file window
appears (figure 4-13). Proceed to step 7.
Figure 4-12 Open window, version 2.xx firmware files
6a. Click Upload. The Firmware Update window appears.
6b. Click OK. The open file window appears. Proceed to step 7.
7. Navigate to the folder where you saved the firmware upgrade file. Select the
file.
Ensure that the firmware upgrade is for the MAV Series AV switcher.
Valid version 1.xx firmware files must have the file extension “.HEX”. Any
other file extension is not a firmware upgrade for your switcher.
Valid version 2.xx firmware files must have the file extension “.s19”. Any
other file extension is not a firmware upgrade for your switcher.
8. Click the Open button.
If your switcher has version 2.xx firmware files, the Extron Firmware Loader
reappears (figure 4-12). Proceed to step 9.
If your switcher has version 1.xx firmware files, proceed to step 11.