Filter
Top Products
SIS
™
Programming and Control, cont’d
CrossPoint 450 Plus and MAV Plus Switchers • SIS Programming and Control
4-18
PRELIMINARY
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Information requests
Information request I
V
X@
X
X#•
A
X@
X
X#
T
X1*
U
X1(]
V
X@
X
X#
= video size,
A
X@
X
X#
= audio size
T
X1*
= BME type
U
X1(
= number of BMEs in
system.
Example:
(MAV 450 Plus 6448
with a connected audio
BME)
I
V64X48
•
A64X48
•
T2
•
U2
]
This low resolution matrix
switcher (T2) has 64 video
and 64 audio inputs by 48
video and 48 audio inputs.
This is a two BME system
(a video and and audio BME).
Request part number N nn-nnn-nn See appendix A for numbers.
Example:
N 60-768-41 CrossPoint 450 Plus 6464
with front panel controller.
N
There are up to three separate sets of Extron fi rmware that the switcher can report on: the CrossPoint/MAV Plus
controller fi rmware, which is the overall control fi rmware; the Ethernet protocol fi rmware, which handles the Ethernet
interface; and the latest optional Extron fi rmware update, which is available at www.Extron.com.
Query controller fi rmware
version
Q
X1&]
Example:
Q
1.23
]
The factory-installed
CrossPoint Plus / MAV Plus
controller fi rmware version
is 1.23 (sample value only).
Query software version
(verbose)
0Q
X1&
-
X2)
-
X2)]
Provide a detailed
status of the Ethernet
protocol fi rmware, the
CrossPoint 450 Plus /
MAV Plus controller
fi rmware, and any fi rmware
upgrade. The fi rmware that
is running is marked by
an asterisk (*). A caret (^)
indicates that the fi rmware
has a bad checksum or an
invalid load. ?.?? indicates
that the fi rmware is not
loaded.
Response description: Ethernet protocol fi rmware version - controller fi rmware version - updated fi rmware version
]
Example:
0Q
Ethernet protocol
firmware
Response:
Description
CrossPoint/MAV firmware version
1.23-0.14(0.20-64x64 Series -Wed, 22 Feb 2006 00:00:00 GMT)-0.25*(0.24-64x64 Series -Thu, 16 Mar 2006 16:39:21 GMT)
Updated firmware version
* indicates the version running Upload date and time
Request system status S
X2@•X2@•X2@•X2@•X2@•X2@•X2@•X2#•X2$•X2$•X(•X(]
Response description:
+5V
•
+3.3V
•
+2.5V
•
Fan voltage
•
-5V
•
-12V
•
+12V
•
Temp
•
Fan1 RPM
•
Fan2 RPM
•
Primary PS
•
Secondary PS
]
Example:
S
4.98•3.30•2.55•11.52•-5.21•-12.35•11.65•78.80•753•774•1•1
Fans receiving 11.52 V Secondary power supply is on and Ok
Fan 1 rotating at 753 RPM5V power system at 4.98V
N
If one of the variables is not applicable to a BME (such as fans for a video BME), the response for that variable is “---”.