Filter
Top Products
3-23
CrossPoint 450 Plus and MAV Plus Switchers • Operation
PRELIMINARY
4. Press and release the input 1 through 4 and output 1 through 4 buttons
(fi gure 3-32).
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
O
U
T
Press and release the Input 1 through Input 4 buttons. The selected buttons light.
Press and release the Output 1 through Output 4 buttons. The selected buttons light.
Figure 3-32 — Assign inputs and outputs
5. Press and release the Preset button to select group 2 (fi gure 3-33).
C O N T R O L
PRESET
ENTER
ESCVIEW
Press and release the Preset button to select group 2.
The button lights amber to indicate the selection.
1324Group #
Figure 3-33 — Select an I/O group
6. Press and release the input 5 through 8 and output 5 through 8 buttons
(fi gure 3-34).
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
I
N
P
U
T
S
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
I
N
17 18 19 20 21 22 23 24
1 2 3 4 5 6 7 8
25
9
O
U
T
Press and release the Input 5 through Input 8 buttons. The selected buttons light.
Press and release the Output 5 through Output 8 buttons. The selected buttons light.
Figure 3-34 — Assign inputs and outputs
7. Do nothing for approximately 30 seconds. The front panel times out and the
switcher exits I/O Group mode.
• Group 1 consists of inputs 1 through 4 and outputs 1 through 4.
• Group 2 consists of inputs 5 through 8 and outputs 5 through 8.