Filter
Top Products
VersaTools
®
MTP Series • Reference Information
VersaTools
®
MTP Series • Reference Information
Specifications, Part Numbers, Accessories, cont’d
Rack mount
MTP T AAP Series ........... Yes, with optional rack panel, or furniture-
/wall-mountable with optional AAP
mounting plates
All other models .............. Yes, with optional 1U, 9.5" deep rack shelf,
part #60-190-01 or 60-604-01; or
VersaTools
®
1U, 3" deep rack shelf, part
#60-190-20 or 60-604-20. Also furniture-
mountable with optional brackets.
Enclosure type.............................. Metal
Enclosure dimensions (Depths exclude connectors and cables.)
MTP T AAP Series
Faceplate ................... 1.4" H x 3.5" W x 0.1" D
(3.6 cm H x 8.9 cm W x 0.3 cm D)
(double space AAP plate)
Transmitter ............... 1.35" H x 2.7" W x 1.3" D
(3.4 cm H x 6.9 cm W x 3.3 cm D)
All other models .............. 1.7" H x 2.2" W x 3.0" D
(1U high, one-eighth rack wide)
4.2 cm H x 5.6 cm W x 7.6 cm D
Product weight............................. 1.0 lbs (0.5 kg)
Shipping weight........................... 3 lbs (2 kg)
Vibration ....................................... ISTA 1A in carton
(International Safe Transit Association)
Listings .......................................... UL, CUL
Compliances ................................. CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ............................................. 30,000 hours
Warranty ....................................... 3 years parts and labor
All nominal levels are at ±10%.
Specifications are subject to change without notice.
A-5A-4
Audio output — audio models (A, AV,
SVA models) only
Number/signal type
MTP T Series (all models) 1 set of proprietary analog signals
MTP R AV, MTP R SV A 1 stereo or dual mono, balanced/
unbalanced
MTP R AV/SV A RCA.... 1 stereo or dual mono, unbalanced
Connectors
MTP T Series .................... 1 female RJ-45 (shielded)
MTP T AAP Series ........... 1 female RJ-45 on a 3" (7.6 cm) pigtail
MTP R AV, MTP R SV A (1) 3.5 mm captive screw connector, 5 pole
MTP R AV/SV A RCA.... 1 pair of RCA female
Impedance
MTP R AV, MTP R SV A 50 ohms unbalanced, 100 ohms balanced
MTP R AV/SV A RCA.... 50 ohms unbalanced
Gain error...................................... ±0.1 dB channel to channel
Maximum level (Hi-Z) ................ >+3.3 dBu, balanced or unbalanced at
1%THD+N
Maximum level (600 ohm) ......... >+2.0 dBm, balanced or unbalanced at
1%THD+N
General
External power supply ............... 100 VAC to 240 VAC, 50/60 Hz, external,
autoswitchable; to 12 VDC, 2.0 A,
regulated
Power input requirements ......... 12 VDC, 0.2 A (max.) with no load;
0.45 A (max.) with full load
If the distance between the transmitter and receiver is less than
500' (150 m) and if the internal jumper is in setting 2, you can
connect a power supply to only one device in a transmitter/
receiver pair. If the distance between transmitter and receiver is
greater than 500' (150 m) or if the internal jumper is in setting 1
(default), connect a power supply to each device.
Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) /
10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) /
10% to 90%, noncondensing
Cooling .......................................... Convection, unvented,