Farallon Communications R9100 Network Card User Manual


 
4-6 User’s Reference Guide
The Netopia R9100 in a 10Base-T network
To connect your 10Base-T network to the Netopia R9100 through an Ethernet port, use a 10Base-T cable with
RJ-45 connectors.
If you have more than eight devices to connect, you can attach additional devices using either a 10Base-T hub
or an EtherWave daisy chain, or some combination of both.
If you add devices connected through a hub, connect the hub to Ethernet port number 1 on the Netopia R9100
and set the Normal/Uplink switch to Uplink.
When there are no more free ports on the 10Base-T hub, the network can be extended using EtherWave, a daisy-chainable
solution from Farallon.
Ethernet
8
4
1
Normal/
LaserWriter
EtherWave
Printer Adapter
EtherWave
ISA Card
EtherWave
NuBus Card
EtherWave
Transceiver
MacintoshPC PC
10BASE-T
Hub
Ethernet
8
4
1
Normal/