Farallon Communications R9100 Network Card User Manual


 
8-12 User’s Reference Guide
Filter sets (firewalls)
These screens allow you to configure security on your network by means of filter sets and a basic firewall.
Details are given in “Security” on page 13-1.
IP address serving
These screens allow you to configure IP address serving on your network by means of DHCP, WANIP, BootP, and
with the optional AppleTalk kit, MacIP.
Details are given in “IP address serving” on page 9-16.
Date and time
You can set the system’s date and time in the Set Date and Time screen.
Select Date and Time in the System Configuration screen and press Return. The Set Date and Time screen
appears.
Follow these steps to set the system’s date and time:
1. Select Current Date and enter the date in the appropriate format. Use one- or two-digit numbers for the
month and day, and the last two digits of the current year. The date’s numbers must be separated by
forward slashes (/).
2. Select Current Time and enter the time in the format HH:MM, where HH is the hour (using either the
12-hour or 24-hour clock) and MM is the minutes.
3. Select AM or PM and choose AM or PM.
Console configuration
You can change the default terminal communications parameters to suit your requirements.
Set Date and Time
System Date Format: MM/DD/YY
Current Date (MM/DD/YY): 12/9/1998
System Time Format: AM/PM
Current Time: 04:18
AM or PM: PM