RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400/DTC300/DTC300M Card Printer User Guide (Rev. 1.1)
4-28
Resolving a Wrong Ribbon Error
All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.
• Symptom: Printer errors out as soon as it receives data from the PC
• Printer Error State: The Ribbon installed does not match the Printer Driver
information
• LCD Error Display: Wrong Ribbon
• Driver Monitor Error Display: Wrong Ribbon
Continued on the next page