Filter
Top Products
FIC M295 / M296 Disassembly Instruction
11. Removing the Build-In Speaker Panel
The internal speaker panel is connected on the front side of the base unit assembly. It’s
connected to the main board using wire cable. Follow the procedures below and illustration on
how to remove the speaker panel.
Connector
Build-In Speaker
Build-In Speaker Panel Disassembly
1. Before removing the built-in speakers, you need first to disassemble keyboard, LCD panel,
palm rest cover, HDD, thermal module, and system top cover.
2. The speaker panel is located on the front side of the base unit. There are no screws attached
to it. Simply unhook the panel from the speaker compartment case.
3. The speaker cable is directly connected to the main board. Pull the wire cable and take it
out.
12. Removing the DC-DC Board
The procedures for removing the DC-DC Board are as follows:
1. The DC-DC Board is located at the lower side of CPU.
2. Remove it and life it up from two sockets carefully.
Lift it up from two sockets gently
P -10 FIC M295 / M296 Disassembly Instruction