Filter
Top Products
Installation and Upgrade
n/p
Tilt Foot
o
Mini-PCI Socket Compartment
q
Memory Compartment
r
Battery Compartment
s
Battery Release Latch
Figure 2-1 Mini-PCI Socket Compartment Door
Locate the modem module socket. Align the notch with the notch in the socket connector and
insert the module as follows:
1. Insert the cable into the modem module.
2. Hold the modem module at an angle and align the modem module connector with the
socket in the system. Push the connector into the socket.
3. Press down on the edge of the modem module until the locking tabs on the sides snap
into place, securing the module.
socket
Cable
Figure 2-2 Mini-PCI Socket Compartment
4. Boot Windows from your hard disk and insert the disc containing the Modem driver for
Windows.
2-4 FIC M295/M296 Service Manual