Filter
Top Products
Outline of the M295 / M296
Type:
[None] / [ATAPI
Removable] / [CD-ROM] /
[User] / [Auto]
Select the drive type corresponding to the
fixed disk installed in your system. If type
USER is selected, Cylinders, Heads &
Sectors edited directly.
Total Sectors: 39070080 (BIOS auto detect, for information only)
Maximum Capacity: 20004MB (BIOS auto detect, for information only)
Multi-Sector
Transfers:
[Disabled] / [2 Sectors] /
[4 Sectors] / [8 Sectors] /
[16 Sectors]
Determine the number of sectors per
block for multiple sector transfers.
LBA Mode Control:
[Disabled] / [Enabled] Enabling LBA causes Logical Block
Addressing to be used in place of
Cylinders, Heads & Sectors
32 Bit I/O:
[Disabled] / [Enabled] This setting enables or disables 32 bit
IDE data transfers
Transfer Mode:
[Standard] / [Fast PIO 1] /
[Fast PIO 2] / [Fast PIO 3] /
[Fast PIO 4] / [FPIO 3 /
DMA1] / [FPIO 4 / DMA2]
Select the method for moving data
to/from the drive. Autotype the drive to
select the optimum transfer mode
Ultra DMA Mode:
[Disabled] / [Mode 1]
[Mode 2]
(BIOS auto detect, for information only)
1.5.2 Using the Advanced Menu
The Advanced Menu allows you to configure the OS and I/O device settings.
PhoenixBIOS Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
NumLock: [Off] Selects Power-on
TV System [PAL] State for NumLock
Sub-System Select [Normal PAL TV]
PS/2 Mouse [Both]
LCD Panel View Expansion [Enabled]
Embedded Share Memory [32MB]
Graphics Aperture [256MB]
EmbedDed Audio Device [Enabled]
Summary Screen: [Disabled]
4
I/O Device Configuration
F1 Help
K
Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
st
Select Menu Enter Select Sub-Menu F10 Save and Exit
Figure 1-14 BIOS Setup Advanced Menu
FIC M295 / M296 Service Manual 1-23