Filter
Top Products
Using Single-sheet
Paper
6.
Press and release
the AUTO LOAD
button (the same button as the
DRAFT/LINE FEED
button). The paper is automatically loaded to the
top of
the
page.
7.
Push the
ON/OFF LINE
button so that the printer is ready to print.
Note: Make sure the front lid is in place whenever you print.
(Always snap the lid shut when replacing
the
lid.) The front lid
doubles as a paper bail, holding the paper against the platen.
8.
If the paper is crooked and needs to be reloaded, pull the paper
release lever forward, pull out the paper, push the lever back,
turn the printer off, and reload by beginning again at step 1 in the
“Automatic paper loading” section above. If the paper just requires
minor adjustment, then pull the paper release lever forward, open
the front lid, adjust the paper, and push the lever back. Then
close the front lid.
l-20
Setting Up