First Alert T-1000 Printer User Manual


 
Cleaning the Printer
To keep your printer running at its best, you should clean it thoroughly
several times a year. Follow the steps below:
1.
Make sure the printer is turned off. Then remove the paper guide.
2.
Using a soft brush, carefully remove all dust and dirt.
3.
If the outer case or paper guide is dirty or dusty, clean it with a soft,
clean cloth dampened with a mild detergent solution. Keep the front
lid in place to prevent water from getting inside the printer.
WARNINGS:
0
Never use alcohols or thinners to clean the printer; these
chemicals can damage the components as well as the
case.
.
Be careful not to get water on the printer mechanism or
electronic components.
l
Do not use a hard or abrasive brush.
.
Do not spray the inside of the printer with lubricants;
unsuitable oils can damage the mechanism. Contact a
qualified service person if you think the printer needs
lubrication.
Troubleshooting
and Maintenance
4-5