Filter
Top Products
Physical description of the FortiGate-5140 chassis FortiGate-5140 chassis
FortiGate-5140-R Chassis Guide
8 01-30000-87705-20090108
http://docs.fortinet.com/ • Feedback
For detailed information about connecting power to the FortiGate-5140 chassis, see
“Connecting a FortiGate-5140 chassis to data center DC power and data center ground”
on page 17 or “Connecting the FortiGate-5140 chassis to AC power using the
FortiGate-5053 power converter tray” on page 20.
The power entry modules are hot swappable, which means you can remove and replace a
defective PEM while the FortiGate-5140 is operating assuming that the FortiGate-5140
system has both PEMs connected to DC power for redundancy.
The back panel also includes the back cable tray, an ESD socket and the chassis ground
connector. The ground connector must be connected to Data Center ground (see
“Connecting the FortiGate-5140 chassis to data center ground” on page 27). Use the back
cable tray for securing and managing DC power, RTN, and ground wires.
The back panel also contains 14 RTM slots numbered to correspond to the front panel
slots. The RTM slots are available for FortiGate-5000 RTM modules such as the
FortiGate-RTM-XB2 module. When the FortiGate-5140 chassis is shipped, these slots are
covered by RTM slot filler panels.
Physical description of the FortiGate-5140 chassis
The FortiGate-5140 chassis is a 12U chassis that can be installed in a standard 19-inch
rack. Table 1 describes the physical characteristics of the FortiGate-5140 chassis.
FortiGate-5140 shelf managers
The FortiGate-5140 chassis includes one or two redundant hot-swappable shelf
managers, located in the dedicated shelf manager slots on the right of the FortiGate-5140
front panel. The primary shelf manager is installed above the secondary shelf manager.
The shelf managers support redundant operation with automatic switchover. If both shelf
managers are operating normally, one acts as the active shelf manager and the other as
the standby. Usually the primary shelf manager would be the active shelf manager and the
secondary shelf manager would be the standby shelf manager. The shelf managers
monitor each other and either can trigger a switchover if necessary. The active shelf
manager performs all shelf manager functions. If the active shelf manager fails or is
removed, the standby shelf manager takes over all shelf manager functions.
Table 1: FortiGate-5140 chassis physical description
Dimensions 21 x 19 x 20.6 in. (53.3 x 48.3 x 52.4 cm)
(Height x Width x Depth)
Shipping weight
completely assembled
with packaging
110 lb. (50 kg)
Operating environment Temperature: 32 to 104°F (5 to 45°C)
Relative humidity: 5 to 85% (Non-condensing)
Storage environment Temperature: -13 to 158°F (-25 to 70°C)
Relative humidity: 5 to 85% (Non-condensing)
Power consumption Maximum: 2,980W DC
Power input 2x redundant -37VDC to -72VDC, 30A per power feed (total 4 + 4
power feeds)