Filter
Top Products
1-4 2. Models and Peripheral Equipment
UG00P-DI (ACPU/QnACPU/FXCPU dual port interface)
Add-on connector with two ports, specifically designed for the connector on the
MITSUBISHI’s ACPU/QnACPU/FXCPU programmer. Operability can be improved when
directly connecting the POD to the ACPU/QnACPU/FXCPU programmer.
* Only when the UG230A-DCL (option unit) is provided
UG00P-U2 (serial extension I/O)
Used as an external I/O unit for PLC. It has 16 inputs and 16 outputs.
UG00C-T (screen data transfer cable) 3 m
Used for connection between the POD and a personal computer, or a personal computer
and the card recorder (UG00P-MR).
UG00C-B (barcode reader connection cable) 3 m
Used for connection between the POD and a barcode reader.
This is also used for connection between the POD and a temperature controller via
RS-232C.
UG00C-H (multi-link 2 master cable/temperature controller connection cable) 3 m
Used for Multi-Link 2 connection between the POD master station and the POD slave
station.
This is also used for connection between the POD and a temperature controller via RS-422
(485).
UG00C-P (temperature controller connection cable) 3 m
Used for connection between the POD and a temperature controller or a PLC using the
PLC2Way function via RS-422 (4-wire connection).
This is also used for connection with a PLC at the MJ2 port on the UG230.
UG30C-J (MJ2-to-D-sub conversion cable) 0.3 m
Used for connection between the UG230 and a PLC at MJ2.
G
D
G
PP
1 2 3
F
GI
N
0
I
N
2
I
N
4
IN
6
IN
8
I
N
1
0
I
N
1
2
I
N
1
4
C
O
M
+
O
U
T
0
I
N
1
I
N
3
I
N
5
I
N
7
I
N
9
I
N
1
1
I
N
1
3
I
N
1
5
O
U
T
2
O
U
T
4
O
U
T
6
C
O
M
1
O
U
T
9
O
U
T
1
1
O
U
T
1
3
O
U
T
1
5
O
U
T
1
O
U
T
3
O
U
T
5
O
U
T
7
O
U
T
8
O
U
T
1
0
O
U
T
1
2
O
U
T
1
4
C
O
M
2
D
C
2
4
V
M
J
1