Fuji Bikes UG230H-SS4x Network Card User Manual


 
2
1. Specifications 2-5
Specifications
Function Performance Specifications
*1 The number of setting memory locations is limited to 256 per screen.
*2 Layer: 4 per screen (base + 3 overlaps)
Item Specifications
Screens Max. 1024
Screen Memory Flash memory: Appox. 1,472 kbyte (varies depending on the font)
Switches 192 per screen
Switch Actions
Set, reset, momentary, alternate, to light
(Possible to press a function switch and a switch on the display at the same time)
(Matrix type: Possible to press two switches on the display at the same time)
Lamps
Reverse, blink, exchange of graphics
192 per screen
Graphs
Pie, bar, panel meter and closed area graph: No limitation within 256 kbyte per screen
*1
Statistics and trend graphs: Max. 256 per layer
*2
Data
Setting
Numerical Data Display
No limitation within 256 kbyte per screen
*1
Character Display
No limitation within 256 kbyte per screen
*1
Message Display
Resolution: Max. 40 1-byte characters
No limitation within 256 kbyte per screen
*1
Sampling
Sampling display of buffer data
(Constant sample, bit synchronize, bit sample, relay sample, alarm function)
Graphic Library Max. 2560
Multi-Overlaps Max. 1024
Data Blocks Max. 1024
Messages Max. 6144 lines
Patterns Max. 1024
Macro Blocks Max. 1024
Page Blocks Max. 1024
Direct Blocks Max. 1024
Screen Blocks Max. 1024
Data Sheets Max. 1024
Screen Library Max. 1024
Temperature Control Network/
PLC2Way Table
Max. 32
Time Display Time display function: provided
Hard Copy Screen hard copy function: provided
Buzzer Buzzer: provided, 2 sounds (short beep, long beep)
Auto OFF Function Always ON, random setting
Self-diagnostic Function
Switch self-test function
Communication parameter setting check function
Communication check function