Filter
Top Products
120 Operating Manual BX900 S1
Hot-plug components
© cognitas. Gesellschft für Technik-Dokumentation mbH 2010 Pfad: C:\Programme\FCT\tim_app\tim_local\work\WALTER\OBJ_DOKU-4953-006.fm
8.2.11 Installing a connection blade
V CAUTION!
Note the safety instructions and the information on handling
electrostatically sensitive devices in section "Safety instructions" on
page 27.
Removing dummy module(s)
Any unused connection blade slots are fitted with appropriate dummy modules
to comply with electromagnetic compatibility (EMC) regulations and to ensure
sufficient cooling of the system components.
Figure 42: Dummy connection blade module
To add connection blades, you must first remove the dummy modules from the
relevant slots.