Filter
Top Products
AP-14
APPENDIX-3 TROUBLESHOOTING
Should any of the following problems arise, refer to the relevant section listed below.
Scanner does not turn on.
Refer to Chapter 5.2 Troubleshooting “Synptom1” on page 120 of the fi-4860C
Operator’s Guide.
The operator panel LCD goes out.
Refer to Chapter 5.2 Troubleshooting “Synptom2” on page 121 of the fi-4860C
Operator’s Guide.
Scanning does not start.
Refer to Chapter 5.2 Troubleshooting “Synptom3” on page 122 of the fi-4860C
Operator’s Guide.
Quality of scanned pictures and photographs is not satisfactory.
Refer to Chapter 5.2 Troubleshooting “Synptom4” on page 125 of the fi-4860C
Operator’s Guide.
Quality of scanned text or lines is unsatisfactory.
Refer to Chapter 5.2 Troubleshooting “Synptom5” on page 127 of the fi-4860C
Operator’s Guide.
The scanned image is distorted and/or not sharp.
Refer to Chapter 5.2 Troubleshooting “Synptom6” on page 128 of the fi-4860C
Operator’s Guide.
Vertical streaks appear in the scanned image.
Refer to Chapter 5.2 Troubleshooting “Synptom7” on page 129 of the fi-4860C
Operator’s Guide.
Check LED starts blinking right after power on.
Refer to Chapter 5.2 Troubleshooting “Synptom8” on page 130 of the fi-4860C
Operator’s Guide.
The Check LED lights right after power on.
Refer to Chapter 5.2 Troubleshooting “Synptom9” on page 131 of the fi-4860C
Operator’s Guide.
Double-feed occurs frequently.
Refer to Chapter 5.2 Troubleshooting “Synptom10” on page 132 of the fi-4860C
Operator’s Guide.
Document jam occurs frequently.
Refer to Chapter 5.2 Troubleshooting “Synptom11” on page 135 of the fi-4860C
Operator’s Guide.
There is a shadow on the leading edge of the scanned image.
Refer to Chapter 5.2 Troubleshooting “Synptom12” on page 138 of the fi-4860C
Operator’s Guide.