Fujitsu FI-6000NS Scanner User Manual


 
x
Safety Precautions
Do not damage the AC cable.
Use only specified AC cables and
connector cables.
Use this scanner only at the indicated
power voltage. Do not connect to
multiple-power strips.
Do not touch the AC cable with wet
hands.
Wipe any dust from the power plug.
Do not install the device in locations that
has oil smoke, steam, humidity, and dust.
Turn the scanner OFF if it is damaged.
Do not put liquids inside the scanner.
Do not touch the inside of the scanner
unless necessary.
Do not use the scanner if you smell a
strange odor.
A damaged AC cable may cause fire or
electric shock. Do not place heavy objects
on AC cables, or pull, bend, twist, heat,
damage or modify AC cables.
Do not use damaged AC cables or power
plugs, or install any cables or power plugs
to loose wall sockets.
Use only specified AC cables and connector
cables. Failure to use the correct cables
might cause electric shock and/or
equipment failure.
Please do not use the AC cable provided
with this scanner for other devices, since
this might cause equipment failure and
other troubles or an electric shock.
Use this scanner only at the indicated
power voltage and current. Improper power
voltage and current might cause fire or
electric shock. Do not connect to multiple-
power strips.
Do not touch the power plug with wet
hands. Doing so might cause electric shock.
Wipe off any dust from metal parts on the
power plug or metal fittings with a soft, dry
cloth. Accumulated dust might cause fire or
electric shock.
Do not install the scanner in locations
subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or electric
shock.
If the scanner is damaged for any reason,
turn the scanner off and unplug the power
cable. Contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider.
Do not insert or drop metal objects in to the
scanner. Do not scan wet documents or
documents with paper clips or staples. Do
not splash or allow the scanner to get wet.
If foreign objects (water, small metal
objects, liquids, etc.) get inside the scanner,
immediately turn off the scanner and
disconnect the power plug from the power
outlet. Then, contact your FUJITSU scanner
dealer or an authorized FUJITSU scanner
service provider. Pay particular attention to
this warning in households where there are
small children.
Do not take apart or modify the scanner.
The inside of the scanner contains high-
voltage components. Touching these
components might cause electric shock or
fire.
If you detect heat coming from the device or
detect other problems such as smoke,
strange smells or noises, immediately turn
off the scanner and then disconnect its
power plug. Make sure that any smoke
coming from it has stopped, before
contacting your FUJITSU scanner dealer or
an authorized FUJITSU scanner service
provider.