Filter
Top Products
Table 6.6 Printer status
-
continued
I
I
status
code
Printer status
86
Monitor
receied
line signal
detector
I
a7
1
RTS
with
wait
for
I ccs
Description
1 Error/
StatUS
/
status
1 I
90
RTS
constant ON
I
~~mw~~efor
g3
--i+zkz
95
Reverse channel
enabled
Reverse channel
line almost
full = on
96
Reverse channel
enabled
Reverse channel
line almost
full = off
98
Transmission error
99
Invalid control
code
100
Invalid control
Seq”C?Ke
101
Buffer overflow
102
/ Right margin
overflow
103 / Invalid
HT
load
104 / Invalid
EVFD
load
status
!
status
/
status
Drop
DTR
with
START/STOP
switch mode is enabled.
status
Ihe message protocol
XONlXOFF
is enabled. / status
The message protocol Reverse Channel is enabled.
When this signal is on, the interface buffer is
almost full.
status
Zhe
message protocol Reverse
Cnannel
signal is
enabled.
When
this signal is on, the :inrerface
buffer is almost empty.
! status
If status
80
is selected, the printer
therefore, the
BUFFW
CLEAR
switch is enabled.
Ihis status code is the same
manner
as that of the
above status code.
This status code is the same manner as that of the
above status code.
1 status
Tne
interface buffer overflowed. The printer
Error
abandons the data after the buffer overflows.
when
the right margin function is disabled, and the
received data exceeds the right margin,, the printer
reports this status. However, if this function is
enabled, the printer prints the data which exceeds
the right margin on the next line, and does not
report this status.
B02P-1500-OOOlA...O5
6
-
31