Filter
Top Products
2-4
Document
Fan the sheets before setting
the document on the ADF paper
chute.
• Do not mix different width documents.
Read surface
Less than
5mm
More than 30mm
Top of the paper
Feed direction
Less than
3mm
More than 30mm
Feed direction
Top of the paper Read surface
NOTE
• Remove paper clips and staples. Flatten the staple
holes .
• Read the following documents using the flatbed.
- Paper with a clip or staple.
- Paper that has ink which is not dry.
- Paper thickness is not constant, such as an envelope.
- Paper that has large rumples or curl.
- Paper that has folds or tears.
- Tracing paper.
- Coating paper.
- Carbon paper.
- Paper that is smaller than A6 size or larger than A4
width.
- Items other than paper, such as clothes, metal sheet,
or OHP film.
- Photographic paper.
- Paper that has perforations on its side.
- Paper that has a shape other than square.
- Paper that is very thin.
• Set the paper so that the top of it is curled as shown
below.
5
10mm